خانه › انتاریو › Thunder Bay › Fibreglass Laminator

Fibreglass Laminator

Thunder Bay, ON

$21–$29 در ساعت

🕒 50 روز پیش منتشر شد

درخواست در Job Bank ↗

هوش مصنوعی کمک هوش مصنوعی
✍️ نوشتن نامه پوششی (کاور لتر)

💵 حقوق خالص: حدود $41,637 در سال ($3,470 در ماه) در انتاریو · محاسبه‌گر حقوق خالص ←

🏠 میانگین اجاره آپارتمان یک‌خوابه در Thunder Bay: $1,173 در ماه (2025). با این دستمزد، حدود 34٪ از حقوق خالص است.

اجاره‌ها: نظرسنجی بازار اجاره CMHC از طریق اداره آمار کانادا.

این آگهی از فایل داده‌های باز ماهانه Job Bank است (ماه سپتامبر 2026). ممکن است جای خالی پر شده باشد؛ پیش از درخواست، آگهی اصلی را در Job Bank ببینید.

جزئیات شغل

دستمزد
$21–$29 در ساعت
نوع کار
Full time
تعداد موقعیت
1
گروه شغلی
Plastic Products Assemblers, Finishers and Inspectors (NOC 94212)
منطقه
Northwest Region
تاریخ انتشار
29 سپتامبر 2026

درباره این شغل: Plastic Products Assemblers, Finishers and Inspectors (NOC 94212)

چشم‌انداز شغلی
★★★★★ متوسط
شانس پیدا کردن کار در انتاریو، 2025-2027
چرا

The employment outlook will be Moderate for plastic products assemblers, finishers and inspectors (NOC 94212) in Ontario for the 2025-2027 period.

The following factors contributed to this outlook:

  • Employment decline will lead to the loss of some positions.
  • Several positions will become available due to retirements.
  • There are a moderate number of unemployed workers with recent experience in this occupation.

Here are some key facts about plastic products assemblers, finishers and inspectors in Ontario:

  • Approximately 5,400 people work in this occupation.
  • Plastic products assemblers, finishers and inspectors mainly work in the following sectors:
    • Plastics and rubber products manufacturing (NAICS 326): 55%
    • Miscellaneous manufacturing (NAICS 339): 6%
    • Machinery manufacturing (NAICS 333): 6%
    • Motor vehicle, body, trailer and parts manufacturing (NAICS 3361-3363): 5%
  • The distribution of full-time and part-time workers in this occupation is:
    • Full-time workers: 92% compared to 81% for all occupations
    • Part-time workers: 8% compared to 19% for all occupations
  • 60% of plastic products assemblers, finishers and inspectors work all year, while 40% work only part of the year, compared to 63% and 37% respectively among all occupations. Those who worked only part of the year did so for an average of 43 weeks compared to 43 weeks for all occupations.
  • Less than 5% of plastic products assemblers, finishers and inspectors are self-employed compared to an average of 15% for all occupations.
  • The gender distribution of people in this occupation is:
    • Men: 51% compared to 52% for all occupations
    • Women: 49% compared to 48% for all occupations
  • The educational attainment of workers in this occupation is:
    • no high school diploma: 23% compared to 9% for all occupations
    • high school diploma or equivalent: 42% compared to 25% for all occupations
    • apprenticeship or trades certificate or diploma: 7% compared to 8% for all occupations
    • college certificate or diploma or university certificate below bachelor's: 14% compared to 22% for all occupations
    • bachelor's degree: 12% compared to 24% for all occupations
    • university certificate, degree or diploma above bachelor level: less than 5% compared to 13% for all occupations

محدوده حقوق رسمی
پایین$18.00/ساعت
میانه$21.75/ساعت
بالا$27.00/ساعت
▲ این شغل: $25.00/ساعت
انتاریو · حقوق‌های Job Bank (2023-2024)
مهاجرت
  • ℹ️ TEER 4: شغل‌های TEER 4 و 5 برای اکسپرس انتری کار ماهر حساب نمی‌شوند؛ بعضی برنامه‌های استانی آنها را می‌پذیرند.
فهرست اکسپرس انتری طبق اعلام IRCC (بررسی‌شده در نوامبر ۲۰۲۶)؛ تغییر می‌کند، پس در سایت IRCC بررسی کنید. این مشاوره مهاجرتی نیست.

توضیحات رسمی این شغل فقط به انگلیسی و فرانسوی منتشر شده است. برای توضیح به فارسی، دکمه «توضیح این شغل» را بزنید.

وظایف اصلی

  • Plastic products assemblers and finishers
  • Operate machines or equipment, or use hand tools to cut, shape, splice and fit plastic materials to form parts and assemblies
  • Assemble composite materials on patterns to form parts and assemblies using bonding agents
  • Operate spray-gun unit to apply resin mixtures to metal or wooden mould to form plastic products
  • Load and operate autoclave oven to cure and bond plastic and composite parts and subassemblies
  • Operate finishing equipment to trim, grind or buff plastic products into final form.
  • Plastic products inspectors
  • Inspect manufactured plastic products for defects and conformance to specifications and quality standards, visually or using instruments
  • Affix seals or tags to approved plastic products and mark and reroute defective products for repair or recycle
  • Prepare reports on products inspected

شرایط لازم برای این شغل

  • Secondary school education is usually required.
  • Experience as a labourer in the same company may be required for assemblers, finishers and inspectors.
  • On-the-job training is provided.

خوب است بدانید

  • Mobility among the various workers in this unit group is possible.
  • Progression to supervisory positions is possible with experience.

عنوان‌های شغلی این گروه: fibreglass laminator, plastic bottle trimmer, plastic parts assembler, plastic products fabricator, plastic products inspector and tester, plastic tank assembler, plastics assembler, plastics inspector

منابع: چشم‌انداز سه‌ساله و حقوق‌های Job Bank (وزارت اشتغال کانادا)، طبقه‌بندی ملی مشاغل ۲۰۲۱ (آمار کانادا)، IRCC. توضیحات درباره کل این گروه شغلی است، نه این کارفرما.